Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today we will see the main instructions that will allow us to disassemble and replace the fuel pump and its filter of the Husqvarna TE 300i enduro motorcycle. First of all, we put the motorcycle on the stand and start disassembling and removing the tank fairing; then we unscrew the pump screws and disconnect the fuel line, emptying the tank of gasoline. At this point, we carry out the revision of the fuel pump, replacing its filter if necessary; we then reassemble the pump and the fuel tank, following the video tutorial until the end!

Posted on 28 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Oil Injection Pump on a Husqvarna TE 300
How to Replace the Oil Injection Pump on a Husqvarna TE 300
Te 300i This guide provides the main instructions on how to disassemble and replace the oil injection pump on the Husqvarna TE 300 enduro bike. First, locate…
How to Remove the Fuel Tank on a Husqvarna TE 300i
How to Remove the Fuel Tank on a Husqvarna TE 300i
Te 300i Let’s discover in this video how to remove the fuel tank on the Husqvarna TE 300i enduro bike, as well as on KTM and Gasgas enduro models. First, rem…
How to Install the Radiator Fan on a Husqvarna TE 300i
How to Install the Radiator Fan on a Husqvarna TE 300i
Te 300i Below are the steps on how to install the radiator fan, thereby improving the cooling of the engine on the Husqvarna TE 300i enduro bike. First, drai…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos