Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Husqvarna 501s
Part: Engine oil

To change the engine oil of a Husqvarna 501S, start by placing the motorcycle on a flat surface and make sure the engine is cold. Locate the oil drain plug on the oil pan, usually located on the bottom side of the engine. Place a draining container under the oil drain plug. Using an appropriate wrench, unscrew the drain plug to allow the used oil to flow into the draining container. Once the used oil is completely drained, securely screw the drain plug back in. Next, locate the oil fill plug, usually located on the top side of the engine. Remove the plug and use a funnel to pour new oil into the engine. Make sure to use the recommended oil for your Husqvarna 501S and pour the correct amount as indicated in the owner's manual. Once the new oil is added, securely screw the oil fill plug back in. Once this procedure is completed, you have successfully changed the engine oil of your Husqvarna 501S.

Posted on 23 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to change the motor oil of a Husqvarna TE 300?
How to change the motor oil of a Husqvarna TE 300?
Husqvarna Te 300 To change the gearbox oil on a Husqvarna TE 300, start by placing the bike on a stand to keep it stable and upright. Make sure the engine is warm to …
How to Change the Engine Oil of the Husqvarna TE 300i
How to Change the Engine Oil of the Husqvarna TE 300i
Te 300i This brief and simple guide provides instructions on how to perform routine maintenance by replacing the engine oil and oil filter on the Husqvarna T…
How to Change the Transmission Oil of the Husqvarna TE 300
How to Change the Transmission Oil of the Husqvarna TE 300
Te 300i This brief guide illustrates the procedure for carrying out routine maintenance by replacing the engine oil and oil filter of the Husqvarna TE 300 2-…

How to Replace the Air Filter on a Harley Davidson Dyna?

To replace the air filter on a Harley Davidson Dyna, loosen the screws securing the cover located on the right side of the bike, just below the fuel tank. Once the cover is removed, you will locate the filter underneath: it must be removed from its housing by unscrewing the fastening screws and sliding it out from its compartment. After the old filter has been removed, position the new replacement part, securing it in place with the screws and covering everything with the cover.

Watch the video!


by ScegliAuto

More videos