Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Husqvarna Svartpilen 401?

Model: Husqvarna Svartpilen 401
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the Husqvarna Svartpilen 401, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then remove the lower cover and place a container underneath the motorcycle.

Next, unscrew the bolts of the two drainage holes using both a 13mm socket wrench and an 18mm one, extract the two secondary filters and clean them from any dirt residue. At this point, all that remains is to open the main filter cap with an 8mm key, insert the replacement, reassemble everything and pour the necessary amount of oil through the appropriate upper hole.


Posted on 4 November 2025 by ScegliAuto


Related tutorials

How do you change the engine oil of the Husqvarna Svartpilen 401?
How do you change the engine oil of the Husqvarna Svartpilen 401?
Svartpilen 401 The engine oil replacement for the Husqvarna Svartpilen 401 can be performed by loosening the drain plug located at the central lower part of the veh…
How to Change the Engine Oil on a Husqvarna Svartpilen 401?
How to Change the Engine Oil on a Husqvarna Svartpilen 401?
Svartpilen 401 You can change the engine oil on the Husqvarna Svartpilen 401 by loosening the drain plug located at the central bottom of the vehicle: once the plug…
How to Change the Engine Oil in a Husqvarna Svartpilen 401?
How to Change the Engine Oil in a Husqvarna Svartpilen 401?
Svartpilen 401 In this tutorial, see how to change the engine oil in a Husqvarna Svartpilen 401, a very simple and quick operation. First, ensure the engine is comp…

How to Replace the Key Fob Battery for the Piaggio Vespa GTS 125?

Let's discover the steps to disassemble and replace the battery of the key fob for the Piaggio Vespa GTS 125. First, take your remote and start by removing the plastic cap at the end. Then, leverage the gap created to open the remote into two parts, accessing the electronic board and the battery, as shown in the video. At this point, remove the old battery and replace it with a new one of the correct type and the same specification; insert it the right way round and check the operation of the electronic key!

Watch the video!


by ScegliAuto

More videos