Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Husqvarna
    3. : 701 Enduro
In this tutorial we can see how to replace the engine oil in the Husqvarna 701 Enduro, an extremely simple and fast operation. First of all, we wait for the engine to be cold enough, then we remove the lower cover and place a container underneath the motorcycle. We then locate the bolts of the two drainage holes, unscrew them using a socket wrench and clean the secondary filter from any dirt residue. At this point, all that remains is to open the main filter cap, insert the replacement, reassemble everything and pour the necessary amount of oil through the appropriate hole.

Posted on 11 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Husqvarna 701?
How to Change the Engine Oil of the Husqvarna 701?
701 Sm To change the engine oil of the Husqvarna 701, you need to loosen the drain plug of the oil tank located at the bottom centre of the bike: by unscrew…
How to replace the engine oil and oil filter on a Husqvarna 701 SM
How to replace the engine oil and oil filter on a Husqvarna 701 SM
701 Sm Below, discover the steps that will allow you to carry out the routine maintenance service by replacing the engine oil and oil filter on the Husqvarn…
How to Change the Engine Oil and Oil Filter on a Husqvarna 701 SM
How to Change the Engine Oil and Oil Filter on a Husqvarna 701 SM
701 Sm In this guide, we will discover the instructions that will allow you to perform the routine maintenance service, replacing the engine oil and oil fil…

How to Replace the Rear Mudguard on the Ducati Monster 696?

In this tutorial, see how to replace the rear mudguard on the Ducati Monster 696, a very simple and quick operation. First, remove the seat, then temporarily disconnect the exhaust silencer to gain working space. Next, locate the four fixing bolts of the mudguard, loosen them using an Allen key, and separate the mudguard from the frame. At this point, disconnect the rear light connector, attach the replacement, and reassemble everything by following the procedure in reverse.

Watch the video!


by ScegliAuto

More videos