Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the time on the Husqvarna Svartpilen 401?

Model: Husqvarna Svartpilen 401
Part: Clock

Video tutorial

In this tutorial, we will see how to adjust the time on the Husqvarna Svartpilen 401, a very simple and quick operation to perform, for example, after disconnecting the battery or following the switch to daylight saving time. First, we insert the key, then turn on the instrument panel and navigate to the odometer "ODO" using the "MODE" button.

Next, we press and hold both the "SET" button and the "MODE" button for the time needed for the clock to start flashing. We adjust the hour with the "MODE" button and the minutes with the "SET" button.

To save the setting, simply press and hold both buttons a second time.


Posted on 17 December 2025 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Husqvarna Svartpilen 401
How to Replace the Air Filter on a Husqvarna Svartpilen 401
Svartpilen 401 To replace the air filter on a Husqvarna Svartpilen 401, insert the ignition key into the lock located on the left side of the bike to release the se…
How do you replace the chain of the Husqvarna Svartpilen 401?
How do you replace the chain of the Husqvarna Svartpilen 401?
Svartpilen 401 To replace the chain of the Husqvarna Svartpilen 401, you will need to break the piece using a chain breaker: this way, it will be possible to split …
How to Replace the Air Filter on the Husqvarna Svartpilen 401
How to Replace the Air Filter on the Husqvarna Svartpilen 401
Svartpilen 401 These brief and simple steps will show you how to remove and replace the engine air filter on the Husqvarna Svartpilen 401, as well as the Vitpilen 4…

How to Replace the Key Fob Battery for the Piaggio Vespa GTS 125?

Let's discover the steps to disassemble and replace the battery of the key fob for the Piaggio Vespa GTS 125. First, take your remote and start by removing the plastic cap at the end. Then, leverage the gap created to open the remote into two parts, accessing the electronic board and the battery, as shown in the video. At this point, remove the old battery and replace it with a new one of the correct type and the same specification; insert it the right way round and check the operation of the electronic key!

Watch the video!


by ScegliAuto

More videos