Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
First, it is always recommended to warm up the engine for a few minutes so that the circulating oil heats up, becoming a bit more liquid and facilitating its subsequent removal. After that, on this model of motorcycle, you will need to remove the plastic that protects the lower part of the engine compartment by unscrewing the fixing bolts as shown in the video. This will allow you to access the 13 mm bolt that serves as the drain plug and collect the used oil in a container. Reassemble everything and fill with the same amount of new oil through the upper hole.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Husqvarna Svartpilen 401?
How to replace the engine oil in the Husqvarna Svartpilen 401?
Svartpilen 401 In this tutorial we can see how to replace the engine oil in the Husqvarna Svartpilen 401, an extremely simple and fast operation. First of all, make…
How to Change the Engine Oil in a Husqvarna Svartpilen 401?
How to Change the Engine Oil in a Husqvarna Svartpilen 401?
Svartpilen 401 In this tutorial, see how to change the engine oil in a Husqvarna Svartpilen 401, a very simple and quick operation. First, ensure the engine is comp…
How do you change the engine oil of the Husqvarna Svartpilen 401?
How do you change the engine oil of the Husqvarna Svartpilen 401?
Svartpilen 401 The engine oil replacement for the Husqvarna Svartpilen 401 can be performed by loosening the drain plug located at the central lower part of the veh…

How to Replace the Air Filter on a Harley Davidson Dyna?

To replace the air filter on a Harley Davidson Dyna, loosen the screws securing the cover located on the right side of the bike, just below the fuel tank. Once the cover is removed, you will locate the filter underneath: it must be removed from its housing by unscrewing the fastening screws and sliding it out from its compartment. After the old filter has been removed, position the new replacement part, securing it in place with the screws and covering everything with the cover.

Watch the video!


by ScegliAuto

More videos