Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Husqvarna
    3. :
  3. Te 300i
    4. : How to disassemble and overhaul the rear brake master cylinder on Husqvarna TE 300

Model: Husqvarna Te 300i
Part: Pump
How to disassemble and overhaul the rear brake master cylinder on Husqvarna TE 300

In today's video we will see how to disassemble and overhaul the rear brake master cylinder on the Husqvarna TE 300 enduro bike, in simple steps. First we go to unscrew the two fixing screws of our rear brake pump, in order to detach it; then unscrew the upper screw, where there is the connection of the hose and the passage of the brake fluid, in order to remove the pump. At this point we are going to carry out the revision of the pump, replacing the gaskets or the whole piece; we just have to reassemble everything, applying the reverse procedure of disassembly!


Posted on 22 February 2024 by ScegliAuto

Change the Kawasaki Z1000 engine oil and oil filter

We see below the instructions on how to carry out the routine maintenance coupon, replacing the engine oil and oil filter, of the Kawasaki Z1000 motorcycle. First we put the stand and start unscrewing the screws of the tip; after which we unscrew the oil vent bolt that we find under the engine, letting it drain into a container for about ten minutes. At this point we use the special wrench to unscrew and replace the oil filter cartridge with the new one, screwing in by hand and gently tightening; finally we pour in the new engine oil, having the same viscosity.

Watch the video!


by ScegliAuto

More videos