Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Let’s discover the steps to perform the routine maintenance service for the oil change on the Husqvarna Svartpilen and Vitpilen. First, drain the engine oil by unscrewing the drain bolt located under the engine; let it flow into a container for about ten minutes. Next, unscrew the two screws of the oil filter cover, removing the cartridge inside; replace it with the new one and reassemble the cover. Finally, fill with the new engine oil!

Updated on 24 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Clutch Cable on a Husqvarna Svartpilen 401
How to Replace the Clutch Cable on a Husqvarna Svartpilen 401
Svartpilen 401 .. and replace the clutch cable on the Husqvarna Svartpilen 401 motorcycle, as well as the Vitpilen. First, place the motorcycle on a stand and disconnect.. …
How to Replace the Coolant in the Husqvarna Svartpilen 401
How to Replace the Coolant in the Husqvarna Svartpilen 401
Svartpilen 401 .. the coolant or antifreeze in the Husqvarna Svartpilen 401 and 701, as well as the Vitpilen. First, place the motorcycle on its centre stand and.. …
How to Replace the Coolant in a Husqvarna Svartpilen 401
How to Replace the Coolant in a Husqvarna Svartpilen 401
Svartpilen 401 .. refilling the coolant in the Husqvarna Svartpilen 401 motorcycle, as well as the Vitpilen. First, place the motorcycle on a stand and start.. …

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos