|
Do it yourself
| |||
| ||||
How to change the engine oil on the Husqvarna TX 300?
Model: Husqvarna Tx 300
Video tutorial
To change the engine oil on the Husqvarna TX 300, loosen the oil drain plug located at the bottom of the bike. Once the plug is unscrewed, allow the oil to drain into a container placed under the drain hole. When all the oil has drained, close the drain plug and add new oil into the crankcase on the left side of the bike. After the correct amount of oil has been added to the crankcase, close it with its plug.
Updated on 19 May 2026 by ScegliAuto
Related tutorials
Tx 300
You can change the engine oil on a Husqvarna TX 300 by loosening the drain plug located at the bottom centre of the instrument panel, allowing the us…
Tx 300
In this video tutorial, see how to disassemble and replace the transmission kit (sprocket, pinion, and chain) on the Husqvarna TX 300 enduro bike. Fi…
Tx 300
It will be possible to replace the stator of the Husqvarna TX 300 by loosening the screws that secure the specific cover housing located on the left …
|
How to Change the Gear Oil on a Vespa 125 LX?
To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the transmission casing, on the left side of the bike near the rear wheel. Once the drain plug is removed, collect the oil in a container until it is empty. At this point, top up through the breather located at the rear of the bike by adding the necessary amount of oil and then close the plug. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
