Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Husqvarna
    3. :
  3. 701 Sm
    4. : How do you replace the stator on the Husqvarna 701 SM?

Model: Husqvarna 701 Sm
Part: Checks and maintenance
How do you replace the stator on the Husqvarna 701 SM?

In order to replace the stator of the Husqvarna 701 SM you have to loosen the screws that fix the saddle so that it can be completely removed. Once the saddle has been detached, you will have to unscrew the screws that secure the plastic that surround the saddle, removing them completely. Then it will be necessary to unscrew the screws that fix the casing positioned on the left side of the bike, inside which the stator will be found. Once it has therefore been removed, it will be possible to insert the new one by mounting all the parts previously removed.


Posted on 23 May 2024 by ScegliAuto



How to replace the sprocket on the Husqvarna 701 SM?
701 Sm In order to replace the sprocket of the Husqvarna 701 SM you need to loosen the bolt located at the end of the swingarm, so that the chain tension ca
How do you replace the Husqvarna 701 battery?
701 Sm In order to replace the battery of the Husqvarna 701 it is necessary to loosen the screws that fix the saddle of the motorcycle, so that it can be re
How do I replace the valve cover on the Husqvarna 701 SM?
701 Sm In order to replace the valve cover of the Husqvarna 701 SM you have to loosen the bolts that secure the saddle to its housing, so that it can be rem

How to change the tires on the Benelli TRK 502

Today we will see, in this video tutorial, how to remove and replace the rear tire of the Benelli TRK 502 motorcycle, following the instructions below. First of all, we put the bike on the central stand and start removing the rear wheel; to do this we unscrew the fixing screws of the brake caliper and remove the central pin of the wheel, as shown in the video. At this point we are going to use levers to remove the tire from the rim, replacing it with the new one; then we reassemble the wheel and inflate the new tire to the working pressure!

Watch the video!


by ScegliAuto

More videos