Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Husqvarna 701 Sm
Part:

In order to replace the fork oil on the Husqvarna 701, you need to loosen the bolts that secure the front wheel of the motorcycle, so that it can be completely removed: after removing the wheel, you can proceed by loosening the bolts that secure the fork to the handlebars. Once the fork has been completely removed, you can open it and remove the internal spring: then the old oil can be collected in a container and replaced with new oil. After the replacement, you can reassemble the fork and install it on the motorcycle.

Posted on 27 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Seat of a Husqvarna 701 SM
Removing the Seat of a Husqvarna 701 SM
701 Sm In this tutorial video, you will learn how to remove the rider's seat from a Husqvarna 701 SM. The operation is very simple and does not require any …
How to Replace the Coolant in the Husqvarna Supermoto 701
How to Replace the Coolant in the Husqvarna Supermoto 701
701 Sm In this brief guide, discover how to replace the coolant or antifreeze in the Husqvarna Supermoto 701 enduro bike. First, place the bike on its stand…
How to Replace the Fuel Filter on a Husqvarna 701
How to Replace the Fuel Filter on a Husqvarna 701
701 Sm To replace the fuel filter on the Husqvarna 701, loosen the fuel pump plate located at the bottom of the rear mudguard. Once loosened, collect the fu…

How do you replace the headlight bulb of the Kymco Downtown 300i?

In order to replace the headlight bulb of the Kymco Downtown 300i, it is necessary to loosen the screws that secure the panels located at the front of the vehicle fairing: once the fixing screws of these panels have been loosened, those on the inside of the front fairing can be unscrewed, so that the latter can be removed from its housing. Now it will be possible to proceed by unscrewing the screws that secure the corresponding headlight, disconnecting the connector and removing the bulb inside; in this way the fairings can be reinstalled.

Watch the video!


by ScegliAuto

More videos