Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Accent
    4. : Cabin air filter

Hyundai Accent - Cabin air filter

Hyundai Accent (2017-2024 / MK 5, HC, YC)
How to replace the cabin air filter in the Hyundai Accent 5
If the cabin air filter in your Hyundai Accent Mk5 (year 2017-2022) is too worn and you want to replace it yourself, just follow the instructions described in …read all…
Posted on 11 December 2022 by ScegliAuto
Hyundai Accent (1999-2005 / MK 1, LC)
Cabin air filter replacement
The passenger compartment air filter is located behind the glove box, on the passenger side; therefore open the door of the glove compartment and release the …read all…
Posted on 6 September 2023 by ScegliAuto
Hyundai Accent (2010-2017 / MK 4, RB, RC)
How to replace the cabin air filter
In this video we will see how to replace the cabin air filter. First we need to open the glove box located in front of the passenger seat. On the side we will …read all…
Posted on 24 July 2023 by ScegliAuto
Shock absorbers (1) Car stereo (4) Battery (3) Spark plugs (1) Wheel rim (1) Key (3) Timing belt (1) Air conditioning controls (1) -board computer (1) Checks and maintenance (8) Brake discs (1) Headlight (4) Tail light (1) Air filter (1) Cabin air filter (3) Petrol filter (1) Window lift switch (2) Accessory Kit (1) Light bulb (2) Headlight bulb (5) Rear light bulb (2) Interior lights ceiling light bulb (1) License plate light (1) Handle (1) Engine (1) Starter motor (2) Door panel (1) Front bumper (3) Brake pads (1) Tires (3) Instrument cluster (2) Fuse box (4) Seat (2) Lock (1) Thermostat (1) Windshield washer nozzle (1) Valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos