Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Accent
    4. : Headlight

Hyundai Accent - Headlight

Hyundai Accent (2010-2017 / MK 4, RB, RC)
Bulb replacement on Hyundai Accent
Open the hood and put on the special support rod. Simply unscrew the bottom cover behind the lights by hand. Unplug the connector, "pop" the metal clip (it's a …read all…
Posted on 24 March 2024 by ScegliAuto
Hyundai Accent (2005-2009 / MC, MK 2)
Disassembly of the headlight of a Hyundai Accent
We see the disassembly of the headlight of a Hyundai Accent with related parts. We raise the front hood to access the headlight. We unscrew the locking pins on …read all…
Posted on 25 December 2023 by ScegliAuto
Hyundai Accent (1999-2005 / MK 1, LC)
Front headlight regeneration instructions
It is quite frequent that the front headlights tend to become opaque due to the action of the sun's rays, atmospheric agents and often also due to the …read all…
Posted on 10 September 2023 by ScegliAuto
Hyundai Accent (1999-2005 / MK 1, LC)
Headlight replacement instructions
If the headlights are particularly yellowed and opaque, it may not be enough to polish them to regenerate them and therefore the best solution is to replace …read all…
Posted on 25 August 2023 by ScegliAuto
Shock absorbers (1) Car stereo (4) Battery (3) Spark plugs (1) Wheel rim (1) Key (3) Timing belt (1) Air conditioning controls (1) -board computer (1) Checks and maintenance (8) Brake discs (1) Headlight (4) Tail light (1) Air filter (1) Cabin air filter (3) Petrol filter (1) Window lift switch (2) Accessory Kit (1) Light bulb (2) Headlight bulb (5) Rear light bulb (2) Interior lights ceiling light bulb (1) License plate light (1) Handle (1) Engine (1) Starter motor (2) Door panel (1) Front bumper (3) Brake pads (1) Tires (3) Instrument cluster (2) Fuse box (4) Seat (2) Lock (1) Thermostat (1) Windshield washer nozzle (1) Valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos