Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Accent
    4. : Front headlight regeneration instructions

Hyundai Accent - Video tutorial

Model: Hyundai Accent MK 1, LC - Years 1999-2005
Part: Headlight
Operation: Front headlight regeneration instructions

It is quite frequent that the front headlights tend to become opaque due to the action of the sun's rays, atmospheric agents and often also due to the corrosive action of some car wash detergents; there are special kits on the market that allow you to make the headlights shine again through a sequence of sanding and polishing; the operation can also be carried out with the spotlight installed but it can also be disassembled; start by carefully cleaning the surface of the headlight and then smooth the wet surface until it becomes uniformly opaque; finally polish with the special paste until the surface shines.


Posted on 10 September 2023 by ScegliAuto



Disassembly of the headlight of a Hyundai Accent
Hyundai Accent (2005-2009 / MK 2, MC) We see the disassembly of the headlight of a Hyundai Accent with related parts. We raise the front hood to access the headlight. We unscrew the locki
Headlight indicator bulb replacement
Hyundai Accent (1999-2005 / MK 1, LC) In order to replace the headlight indicator bulb it is necessary to remove the headlight itself: therefore open the front hood and intercept the fixi
Headlight replacement instructions
Hyundai Accent (1999-2005 / MK 1, LC) If the headlights are particularly yellowed and opaque, it may not be enough to polish them to regenerate them and therefore the best solution is to

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos