Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Accent
    4. : Instrument cluster

Hyundai Accent - Instrument cluster

Hyundai Accent (2017-2024 / MK 5, HC, YC)
How to reset TPMS on Hyundai Accent?
If, while we are travelling, the low tire pressure warning light comes on with our car, the first thing to do is to check the pressures of the four tires and, …read all…
Posted on 7 April 2023 by ScegliAuto
Hyundai Accent (2010-2017 / MK 4, RB, RC)
How do you remove the Hyundai Accent instrument cluster?
In order to remove the Hyundai Accent instrument panel it is necessary to first remove the steering and the light switches, in order to be able to operate with …read all…
Posted on 10 May 2024 by ScegliAuto
Shock absorbers (1) Car stereo (4) Battery (3) Spark plugs (1) Wheel rim (1) Key (3) Timing belt (1) Air conditioning controls (1) -board computer (1) Checks and maintenance (8) Brake discs (1) Headlight (4) Tail light (1) Air filter (1) Cabin air filter (3) Petrol filter (1) Window lift switch (2) Accessory Kit (1) Light bulb (2) Headlight bulb (5) Rear light bulb (2) Interior lights ceiling light bulb (1) License plate light (1) Handle (1) Engine (1) Starter motor (2) Door panel (1) Front bumper (3) Brake pads (1) Tires (3) Instrument cluster (2) Fuse box (4) Seat (2) Lock (1) Thermostat (1) Windshield washer nozzle (1) Valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos