Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Accent
    4. : Battery

Hyundai Accent - Battery

Hyundai Accent (2010-2017 / MK 4, RB, RC)
How to replace the battery on a Hyundai Accent.
Do we intend to proceed with replacing the battery on this car model? In the description below, we will find the replacement procedures to follow, and we can …read all…
Posted on 29 April 2023 by ScegliAuto
Hyundai Accent (2010-2017 / MK 4, RB, RC)
How to change the battery on Hyundai Accent
If we need to replace the battery on this car model from the Korean company, we can find instructions on how to behave in the video and in the description …read all…
Posted on 29 May 2023 by ScegliAuto
Hyundai Accent (2010-2017 / MK 4, RB, RC)
Hyundai Accent battery mount
In today's video tutorial we will see how to mount the battery of a 2013 Hyundai Accent. First we open the bonnet and unscrew the clamps and everything …read all…
Posted on 17 December 2023 by ScegliAuto
Shock absorbers (1) Car stereo (4) Battery (3) Spark plugs (1) Wheel rim (1) Key (3) Timing belt (1) Air conditioning controls (1) -board computer (1) Checks and maintenance (8) Brake discs (1) Headlight (4) Tail light (1) Air filter (1) Cabin air filter (3) Petrol filter (1) Window lift switch (2) Accessory Kit (1) Light bulb (2) Headlight bulb (5) Rear light bulb (2) Interior lights ceiling light bulb (1) License plate light (1) Handle (1) Engine (1) Starter motor (2) Door panel (1) Front bumper (3) Brake pads (1) Tires (3) Instrument cluster (2) Fuse box (4) Seat (2) Lock (1) Thermostat (1) Windshield washer nozzle (1) Valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos