Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Atos
    4. : Car stereo

Hyundai Atos - Car stereo

Hyundai Atos (2011-2022 / MK 2)
How to replace the stock car radio with an Android one on the Hyundai Atos.
Today, in this video tutorial, we will see how to dismantle and replace the original radio of the Hyundai Atos, following the instructions below. First, we get …read all…
Posted on 10 June 2023 by ScegliAuto
Hyundai Atos (1997-2008 / MK 1)
How to take apart the car stereo of a Hyundai Atos
Let's see how to disassemble the car radio of a Hyundai Atos. First of all with a plastic lever we detach the frame of the car radio placed around it. With the …read all…
Posted on 8 November 2023 by ScegliAuto
Hyundai Atos (1997-2008 / MK 1)
How to disassemble the car stereo and accessories of a Hyundai Atos
How do we disassemble the car radio of a Hyundai Atos? Let's see carefully in this video how to perform the disassembly. With a plastic or metal lever, we pry …read all…
Posted on 6 October 2023 by ScegliAuto
Car stereo (3) Spark plugs (1) Timing belt (4) Checks and maintenance (1) Gearshift gaiter (1) Fog lights (1) Petrol filter (1) Oil filter (1) Hand brake (1) Light bulb (1) Headlight bulb (1) Dashboard light (1) Handle (4) Engine oil (2) Door panel (6) Front bumper (1) Instrument cluster (1) Fuse box (5) Parking sensors (1) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos