Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Atos
    4. : Handle

Hyundai Atos - Handle

Hyundai Atos (1997-2008 / MK 1)
How to replace the door handle of a Hyundai Atos
Before we are able to start, we will have to open the door of our Hyundai Atos. Let's start by unscrewing and removing the screw that secures the handle to the …read all…
Posted on 27 February 2024 by ScegliAuto
Hyundai Atos (1997-2008 / MK 1)
How to replace the exterior door handle of a Hyundai Atos
Before we can start, we will have to disassemble and remove the door panel of our Hyundai Atos, simply by unscrewing the relative fixing screws and unhooking …read all…
Posted on 26 January 2024 by ScegliAuto
Hyundai Atos (1997-2008 / MK 1)
Hyundai Atos external handle replacement
Replacing the exterior handle on a Hyundai Atos? Let's see the disassembly of the handle. To remove the handle, the door panel must be removed. Remove the …read all…
Posted on 15 December 2023 by ScegliAuto
Hyundai Atos (1997-2008 / MK 1)
How do you change the exterior handle in the Hyundai Atos
When the external door handle of the Hyundai Atos is broken it is necessary to proceed as follows: open the door and remove the internal panel of the door …read all…
Posted on 18 September 2023 by ScegliAuto
Car stereo (3) Spark plugs (1) Timing belt (4) Checks and maintenance (1) Gearshift gaiter (1) Fog lights (1) Petrol filter (1) Oil filter (1) Hand brake (1) Light bulb (1) Headlight bulb (1) Dashboard light (1) Handle (4) Engine oil (2) Door panel (6) Front bumper (1) Instrument cluster (1) Fuse box (5) Parking sensors (1) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos