Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Atos
  6. : How to replace the door handle of a Hyundai Atos

Hyundai Atos - Video tutorial

Model: Hyundai Atos MK 1 - Years 1997-2008
Part: Handle
Operation: How to replace the door handle of a Hyundai Atos

Before we are able to start, we will have to open the door of our Hyundai Atos. Let's start by unscrewing and removing the screw that secures the handle to the door panel, using a Phillips screwdriver. After that, we will have to go and disengage and pull the handle out of the door panel. By doing so, we will have freed the handle itself. At this point, we will have to unhook the clip that secures the handle cable, and then disconnect the cable itself, and we will have finished the disassembly. To fit the new handle, we will have to follow these steps in reverse, and the replacement will be completed.


Posted on 27 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos