Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Handle on a Hyundai Atos

Model: Hyundai Atos MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Handle

See other generations:
Video tutorial

This video shows how to replace the handle on a Hyundai Atos that can no longer be opened from the outside. First, you need to remove the internal door panel, which comes off very easily: there are only four screws, one in the handle, then just clips, and then remove part of the internal insulation to access the handle from the inside: there are two 10 mm bolts to remove from the sides, allowing you to detach it from the outside.

If you want to replace it, you can find it on Amazon with the code B0C7C2MTXC for £36.79 with free delivery. If you want to try to repair it, however, follow the step-by-step procedure from the YouTuber, who explains it very well.

Refit it by inserting it back into place, attaching the linkage, then close the insulation and replace the panel.


Updated on 29 October 2026 by ScegliAuto


Related tutorials

How to Replace the External Door Handle on a Hyundai Atos
How to Replace the External Door Handle on a Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) Before you begin, remove the door panel of your Hyundai Atos by unscrewing the relevant fixing screws and disconnecting the various cables. Start by …
How to Change the External Handle on a Hyundai Atos
How to Change the External Handle on a Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) When the external handle of the Hyundai Atos door is broken, proceed as follows: open the door and remove the inner panel of the door (the video sugg…
Replacing the External Handle on a Hyundai Atos
Replacing the External Handle on a Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) Replacing the external handle on a Hyundai Atos? Start by removing the door panel. Detach the plastic cover from the door, then unscrew the retaining…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos