Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Atos
    4. : How do you change the exterior handle in the Hyundai Atos

Hyundai Atos - Video tutorial

Model: Hyundai Atos MK 1 - Years 1997-2008
Part: Handle
Operation: How do you change the exterior handle in the Hyundai Atos

When the external door handle of the Hyundai Atos is broken it is necessary to proceed as follows: open the door and remove the internal panel of the door itself (to remove the internal panel of the door, in the video, the link to another one is suggested video). At this point, we identify the handle from the inside and, using a screwdriver, we disassemble the connection of the handle to the lock. Now we unscrew, using a special wrench, the 2 bolts that fix the handle in position. Once this is done, just push the handle, with the key, from the inside towards the outside of the door and, in this way, we have taken it apart. Now we can proceed to assemble the new handle by performing the same operations seen but proceeding in the opposite direction.


Posted on 18 September 2023 by ScegliAuto



Hyundai Atos external handle replacement
Hyundai Atos (1997-2008 / MK 1) Replacing the exterior handle on a Hyundai Atos? Let's see the disassembly of the handle. To remove the handle, the door panel must be removed. Remov
How to replace the exterior door handle of a Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) Before we can start, we will have to disassemble and remove the door panel of our Hyundai Atos, simply by unscrewing the relative fixing screws and u
How to replace the door handle of a Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) Before we are able to start, we will have to open the door of our Hyundai Atos. Let's start by unscrewing and removing the screw that secures the han

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos