Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Atos
    4. : Timing belt

Hyundai Atos - Timing belt

Hyundai Atos (1997-2008 / MK 1)
When to replace the timing belt of the Hyundai Atos
In this guide, we will see the main information useful for disassembling and replacing the timing belt of the Hyundai Atos; the manufacturer declares that, on …read all…
Posted on 29 February 2024 by ScegliAuto
Hyundai Atos (1997-2008 / MK 1)
Timing belt replacement on Atos
Disassembling the timing belt on a Hyundai Atos. Let's see what disassembles to access the straps. We lift the car with a jack, remove the front wheel and the …read all…
Posted on 20 December 2023 by ScegliAuto
Hyundai Atos (1997-2008 / MK 1)
How to replace the timing belt on Hyundai Atos
Let's get ready to replace the timing belt on Hyundai Atos: let's lift the car on a jack (if we have to intervene from below). Lift the bonnet, remove the …read all…
Posted on 15 November 2023 by ScegliAuto
Hyundai Atos (1997-2008 / MK 1)
How to remove and replace the belt on a Hyundai Atos
Let's see in this video how to remove and replace the belt and the tensioner roller on a Hyundai Atos. With a socket wrench we remove the water pump located in …read all…
Posted on 11 October 2023 by ScegliAuto
Car stereo (3) Spark plugs (1) Timing belt (4) Checks and maintenance (1) Gearshift gaiter (1) Fog lights (1) Petrol filter (1) Oil filter (1) Hand brake (1) Light bulb (1) Headlight bulb (1) Dashboard light (1) Handle (4) Engine oil (2) Door panel (6) Front bumper (1) Instrument cluster (1) Fuse box (5) Parking sensors (1) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos