Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Atos
    4. : When to replace the timing belt of the Hyundai Atos

Hyundai Atos - Video tutorial

Model: Hyundai Atos MK 1 - Years 1997-2008
Part: Timing belt
Operation: When to replace the timing belt of the Hyundai Atos

In this guide, we will see the main information useful for disassembling and replacing the timing belt of the Hyundai Atos; the manufacturer declares that, on the petrol engine, the belt should be replaced every 90,000 kilometers. To carry out the replacement of the timing belt, it is necessary to remove the engine support and remove the side cover of the distribution; on the engine casing there are references or notches to be taken into consideration for the subsequent timing of the engine, following the installation of the new timing belt.


Posted on 29 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Atos 1997-2008 - When to replace the timing belt in the Hyundai Atos Prime? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos