Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Atos
    4. : Timing belt replacement on Atos

Hyundai Atos - Video tutorial

Model: Hyundai Atos MK 1 - Years 1997-2008
Part: Timing belt
Operation: Timing belt replacement on Atos

Disassembling the timing belt on a Hyundai Atos. Let's see what disassembles to access the straps. We lift the car with a jack, remove the front wheel and the right wheel rocker. We disassemble the covers of the various belts. With a fixed wrench we loosen the belt tensioner roller and remove the belt from its seat. With a socket wrench we go to unscrew the tightening pin of the belt tensioner roller. We mount the belt tensioner and the belt itself, we tighten everything with the socket wrench. We mount the rivets with attached stone guards and reassemble the rim with the rubber on the car. We test the functioning of the car.


Posted on 20 December 2023 by ScegliAuto



When to replace the timing belt of the Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) In this guide, we will see the main information useful for disassembling and replacing the timing belt of the Hyundai Atos; the manufacturer declares
How to replace the timing belt on Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) Let's get ready to replace the timing belt on Hyundai Atos: let's lift the car on a jack (if we have to intervene from below). Lift the bonnet, remov
How to remove and replace the belt on a Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) Let's see in this video how to remove and replace the belt and the tensioner roller on a Hyundai Atos. With a socket wrench we remove the water pump

    Frequently Asked Questions

    • Atos 1997-2008 - When to replace the timing belt in the Hyundai Atos Prime? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos