Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Atos
  6. : How to remove and replace the belt on a Hyundai Atos

Hyundai Atos - Video tutorial

Model: Hyundai Atos MK 1 - Years 1997-2008
Part: Timing belt
Operation: How to remove and replace the belt on a Hyundai Atos

Let's see in this video how to remove and replace the belt and the tensioner roller on a Hyundai Atos. With a socket wrench we remove the water pump located in the car's engine compartment, then, with a fixed wrench, we go to loosen the tensioner roller and remove the belt from its seat. With a socket wrench we go to unscrew the tightening pin of the belt tensioner roller, remove it from the engine compartment. We assemble the new belt tensioner and toothed belt, tighten everything with the fixed key. Finally we assemble the soundproofing panel that covers the engine head. We test the correct functioning of the car.


Posted on 11 October 2023 by ScegliAuto



When to replace the timing belt of the Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) In this guide, we will see the main information useful for disassembling and replacing the timing belt of the Hyundai Atos; the manufacturer declares
How to replace the timing belt on Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) Let's get ready to replace the timing belt on Hyundai Atos: let's lift the car on a jack (if we have to intervene from below). Lift the bonnet, remov
Timing belt replacement on Atos
Hyundai Atos (1997-2008 / MK 1) Disassembling the timing belt on a Hyundai Atos. Let's see what disassembles to access the straps. We lift the car with a jack, remove the front whee

Other guides that may interest you

    Frequently Asked Questions

    • Atos 1997-2008 - When to replace the timing belt in the Hyundai Atos Prime? Read Answer

How do you open the fuel flap of the Volkswagen Golf 5?

In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism.

Watch the video!


by ScegliAuto

More videos