Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I20
    4. : Checks and maintenance

Hyundai I20 - Checks and maintenance

Hyundai I20 (2014-2020 / GB, MK 2)
How do you reset the tire pressure warning light on Hyundai I20?
When the low tire pressure warning light appears on the Hyundai I20 display, it means that at least one of the four tires is at insufficient inflation …read all…
Posted on 3 May 2024 by ScegliAuto
Hyundai I20 (2008-2014 / PB, MK 1)
Reset the tire pressure warning light on the Hyundai I20 MK3
Let's find out in this guide the steps that will allow us to reset the tire pressure warning light on Hyundai I20 third series; before carrying out the …read all…
Posted on 20 April 2024 by ScegliAuto
Hyundai I20 (2008-2014 / PB, MK 1)
How to activate bluetooth on Hyundai I20
Do we want to activate and connect the bluetooth of our Hyundai I20? Let's see how the Smartphone is connected. We activate the bluetooth of our smartphone and …read all…
Posted on 15 February 2024 by ScegliAuto
Hyundai I20 (2008-2014 / PB, MK 1)
Maintenance warning light reset on Hyundai I 20
Let's see how to reset the maintenance light on the Hyundai I20 instrument cluster. We turn on the instrument panel of our Hyundai I20 with the special remote …read all…
Posted on 11 February 2024 by ScegliAuto
Airbags (1) Battery (2) Spark plugs (2) Key (4) Timing belt (3) -board computer (1) Checks and maintenance (4) Cabin air filter (2) Light bulb (1) Rear light bulb (1) Handle (1) Starter motor (1) Door panel (1) Fuel pump (1) Instrument cluster (2) Fuse box (1) Outside rearview mirror (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos