Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I20
    4. : Starter motor

Hyundai I20 - Starter motor

Hyundai I20 (2014-2020 / GB, MK 2)
How do I remove the starter motor on the Hyundai I20?
Let's see in this guide the main instructions on how to remove and replace the starter motor of the Hyundai I20, but also of the I10. First we open the engine …read all…
Posted on 25 April 2024 by ScegliAuto
Airbags (1) Battery (2) Spark plugs (2) Key (4) Timing belt (3) -board computer (1) Checks and maintenance (4) Cabin air filter (2) Light bulb (1) Rear light bulb (1) Handle (1) Starter motor (1) Door panel (1) Fuel pump (1) Instrument cluster (2) Fuse box (1) Outside rearview mirror (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos