Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Starter Motor from the Hyundai I20

Model: Hyundai I20 GB, MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Starter motor

See other generations:
Video tutorial

In this guide, find the main instructions on how to remove and replace the starter motor of the Hyundai I20, as well as the I10. First, open the bonnet and disconnect the battery. Next, lift the vehicle to access the starter motor, unscrewing its mounting bolts and disconnecting the power wiring to remove it, as shown in the video.

At this point, replace the starter motor with a new one of the correct type or the original spare part; then reassemble everything by applying the reverse procedure!


Updated on 14 May 2026 by ScegliAuto


Related tutorials

Reset Maintenance Light on Hyundai I20
Reset Maintenance Light on Hyundai I20
Hyundai I20 (2008-2014 / MK 1, PB) Learn how to reset the maintenance light on the instrument cluster of the Hyundai I20. Start the instrument cluster with the appropriate remote key, …
Guide to Replacing the Timing Chain on the Hyundai i20 1.4 CRDI
Guide to Replacing the Timing Chain on the Hyundai i20 1.4 CRDI
Hyundai I20 (2008-2014 / MK 1, PB) In this guide, see how to remove and replace the timing chain on the Hyundai i20 1.4 CRDI, following the instructions provided below. In this case, t…
How to Remove and Replace the Key Fob Shell on the Hyundai I20
How to Remove and Replace the Key Fob Shell on the Hyundai I20
Hyundai I20 (2008-2014 / MK 1, PB) In this short and simple video, you will understand the main steps needed to remove and replace the key fob shell on the Hyundai I20. First, take you…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos