Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Maintenance Light on Hyundai I20

Model: Hyundai I20 MK 1, PB - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

See other generations:
Video tutorial

Learn how to reset the maintenance light on the instrument cluster of the Hyundai I20. Start the instrument cluster with the appropriate remote key, then press the button located on the steering wheel (to the right of the wheel). Scroll through the button until the maintenance reset service message appears and select it with the OK button.

Turn off and then turn on the instrument cluster again with the key: the maintenance message will appear. Double-check everything and turn off the instrument cluster after setting it. Read the information displayed on the instrument cluster.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to reset the "Service" light on a Hyundai i20?
How to reset the "Service" light on a Hyundai i20?
Hyundai I20 (2020-2026 / BI3, MK 3, BC3) To reset the "Service" light on a Hyundai i20, start by turning on the ignition without starting the engine. Use the buttons on the steering wheel to…
Reset the Tyre Pressure Warning Light on the Hyundai I20 MK3
Reset the Tyre Pressure Warning Light on the Hyundai I20 MK3
Hyundai I20 (2008-2014 / MK 1, PB) This guide outlines the steps to reset the tyre pressure warning light on the Hyundai I20 third generation. Before proceeding, ensure that all four t…
How to reset the service light on the Hyundai I20
How to reset the service light on the Hyundai I20
Hyundai I20 (2008-2014 / MK 1, PB) To reset the warning light on a Hyundai I20 vehicle, we need to: - get into the vehicle and close all doors; - turn on the car's instrument panel; - …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos