Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. I20
  6. : How to disassemble the remote control to replace the battery on Hyundai I20

Hyundai I20 - Video tutorial

Model: Hyundai I20 PB, MK 1 - Years 2008-2014
Part: Battery
Operation: How to disassemble the remote control to replace the battery on Hyundai I20

Today we will see how to disassemble and replace the remote control key battery on Hyundai I20 second series, following the instructions below. First we take our remote control in hand and start by levering the sides of the remote control to open it in two parts, thus accessing the electronic board and the battery, as shown in the video. At this point we remove the battery from its seat and replace it with the new one, of the right type (in this case a 3V CR 2032); we just have to insert it in the correct direction and assemble the remote control, following the video to the end!


Posted on 20 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos