Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Key Fob Shell on the Hyundai I20

Model: Hyundai I20 PB, MK 1 - Years 2008-2014
Part: Key

In this short and simple video, you will understand the main steps needed to remove and replace the key fob shell on the Hyundai I20. First, take your key fob and use a thin tool to pry open the sides to remove the back cover and battery; then split the key fob into two parts, as shown in the video. Next, remove the electronic board and transponder chip; assemble all components into the new key fob shell, ensuring they are correctly positioned!

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset Maintenance Light on Hyundai I20
Reset Maintenance Light on Hyundai I20
Hyundai I20 (2008-2014 / PB, MK 1) Learn how to reset the maintenance light on the instrument cluster of the Hyundai I20. Start the instrument cluster with the appropriate remote key, …
How to Dismantle the Remote Key to Replace the Battery on the Hyundai I20
How to Dismantle the Remote Key to Replace the Battery on the Hyundai I20
Hyundai I20 (2008-2014 / PB, MK 1) Today, you will learn how to dismantle and replace the battery in the remote key for the Hyundai I20 second generation, following the instructions be…
How to Remove the Steering Wheel Airbag from a Hyundai I20?
How to Remove the Steering Wheel Airbag from a Hyundai I20?
Hyundai I20 (2008-2014 / PB, MK 1) To remove the steering wheel airbag from a Hyundai I20, you need to loosen the screws located on the side of the steering wheel. There are two screws…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos