Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit the Glass of the Wing Mirror on a Hyundai I20

Model: Hyundai I20 MK 1, PB - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Side mirror

See other generations:
This video is currently unavailable

In this short and simple video, you will see how to fit the glass of the external wing mirror on a first series Hyundai I20. First, remove the old mirror glass by prying it off the sides with something thin; then check that the clips on the mirror are in good condition so you can fit the new glass.

Next, position the glass on the inner shell, pushing until it clicks into place; if the car has automatic mirror adjustment, you will need to connect the electrical connector to the glass first.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

What is the Fuse Diagram for the Hyundai i20?
What is the Fuse Diagram for the Hyundai i20?
Hyundai I20 (2014-2020 / GB, MK 2) In this video, you can see the fuse diagrams for the Hyundai i20 and where the respective boxes are located, useful if you need to check the fuse for…
How to Remove the Starter Motor from the Hyundai I20
How to Remove the Starter Motor from the Hyundai I20
Hyundai I20 (2014-2020 / GB, MK 2) In this guide, find the main instructions on how to remove and replace the starter motor of the Hyundai I20, as well as the I10. First, open the bonn…
How to Reset the TPMS in a Hyundai i20
How to Reset the TPMS in a Hyundai i20
Hyundai I20 (2014-2020 / GB, MK 2) In today's video, see how to address the tyre pressure warning light on the dashboard of the Hyundai i20. This tutorial also applies to other contemp…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos