Do it yourself
Frequently asked questions about cars and motorcycles

Guide to Replacing the Timing Chain on the Hyundai i20 1.4 CRDI

Model: Hyundai I20 PB, MK 1 - Years 2008-2014
Part: Timing belt

In this guide, see how to remove and replace the timing chain on the Hyundai i20 1.4 CRDI, following the instructions provided below. In this case, the timing chain is replaced with the engine disassembled; therefore, remove the timing cover and the valve cover to access it. At this point, take the necessary references for disassembling the timing chain, removing the appropriate link; now install the new timing chain, correctly timing the engine, following the video tutorial until the end!

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Hyundai I20 (2008-2014 / PB, MK 1) Before you begin, open the front bonnet of your Hyundai i20. Start by removing the injectors and the upper section of the cylinder head by unscrewing…
Hyundai I20 (2008-2014 / PB, MK 1) In this brief guide, you will discover the main steps to remove and replace the timing chain on the first series Hyundai i20 with a 1.2 engine; gener…
Hyundai I20 (2014-2020 / MK 2, GB) In this guide, find the main instructions on how to remove and replace the starter motor of the Hyundai I20, as well as the I10. First, open the bonn…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos