Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Changing the Timing Chain on the Hyundai i20 1.2

Model: Hyundai I20 MK 1, PB - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Timing belt

See other generations:
Video tutorial

In this brief guide, you will discover the main steps to remove and replace the timing chain on the first series Hyundai i20 with a 1.2 engine; generally, the chain should be changed on these engines around 62,000 miles. First, drain the engine oil and then lift the vehicle to undo the nut on the crankshaft pulley using a 24 mm socket; then disconnect the auxiliary belt and remove the alternator.

Now you can remove the timing cover to access the chain; take the necessary references to remove it and replace it with the new one!


Updated on 26 May 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Chain on the Hyundai i20 1.4 CRDI
Guide to Replacing the Timing Chain on the Hyundai i20 1.4 CRDI
Hyundai I20 (2008-2014 / MK 1, PB) In this guide, see how to remove and replace the timing chain on the Hyundai i20 1.4 CRDI, following the instructions provided below. In this case, t…
How to Replace the Timing Chain on a Hyundai i20
How to Replace the Timing Chain on a Hyundai i20
Hyundai I20 (2008-2014 / MK 1, PB) Before you begin, open the front bonnet of your Hyundai i20. Start by removing the injectors and the upper section of the cylinder head by unscrewing…
How to Remove the Starter Motor from the Hyundai I20
How to Remove the Starter Motor from the Hyundai I20
Hyundai I20 (2014-2020 / GB, MK 2) In this guide, find the main instructions on how to remove and replace the starter motor of the Hyundai I20, as well as the I10. First, open the bonn…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos