Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Panel of a Hyundai Elantra

Model: Hyundai Elantra MK 4, HD - Years: 2006, 2007, 2008, 2009, 2010
Part: Door trim panel

See other generations:
Video tutorial

Replacing or removing the door panel of a Hyundai Elantra is a very simple and quick task to do independently. To start the removal of the panel, open the door; in our video tutorial, the door in question is the front right one. Immediately remove the screw located behind the opening handle and also the central screw of the panel found inside the closing handle, as well as the housing for the window switch.

Unscrew the side screw and proceed to remove the panel by disconnecting the connector. After performing the desired maintenance, you can either replace the panel or insert the previously removed panel.


Updated on 26 October 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel on the Hyundai Elantra
How to Remove the Front Door Panel on the Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) In this guide, you will discover the steps and instructions to remove and take off the front door panel on the Hyundai Elantra. First, open the front…
How to Replace the Speaker on the Hyundai Elantra?
How to Replace the Speaker on the Hyundai Elantra?
Hyundai Elantra (2015-2020 / MK 6) To replace the speaker on the Hyundai Elantra, remove the corresponding door panel: this can be done by detaching the protective cover of the retaini…
Removing Door Panel and Window Switch on Hyundai Elantra
Removing Door Panel and Window Switch on Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) Open the cover located under the central handle and remove the now exposed screw. Do the same with the screw near the opening handle. That's it! You …

Other guides you may be interested in

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos