Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : Removal of door panel and window control panel on Hyundai Elantra

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra MK 6 - Years 2015-2020
Part: Door panel
Operation: Removal of door panel and window control panel on Hyundai Elantra

Open the screw cover under the central handle and unscrew the now uncovered screw. Do the same thing with the screw located near the opening handle. Already done! It was enough to unscrew these two screws. For the rest, in fact, the door panel on Hyundai Elantra is in place only by interlocking, so you just need to pry all around the joint slot to remove the panel from the door. While disassembling it, disconnect the connectors. If you also want to remove the window control panel from the panel, just extract it with a plastic wedge and disconnect the cables. Good work!


Posted on 8 January 2024 by ScegliAuto



How do you replace the speaker of the Hyundai Elantra?
Hyundai Elantra (2015-2020 / MK 6) In order to replace the speaker of the Hyundai Elantra, you need to remove the corresponding door panel. This can be done by removing the protective
How to replace the Hyundai Elantra remote control battery
Hyundai Elantra (2015-2020 / MK 6) Let's see in this short video tutorial how to replace the remote control battery of a Hyundai Elantra. First, we press the release button of the phys
How to replace the exterior mirror in Hyundai Elantra?
Hyundai Elantra (2015-2020 / MK 6) In this tutorial we can see how to replace the exterior rearview mirror in the Hyundai Elantra, an extremely simple and fast operation. Let's start b

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos