Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuse on a Hyundai IX35?

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Fuse box

To replace a fuse on a Hyundai IX35, you must first locate the fuse box, which is located behind the driver's glove compartment. To access it, open the glove compartment and remove the protective panels. Once the fuse box is exposed, refer to the diagram on the cover or in the owner's manual to identify the damaged fuse. Using fuse pliers or a specific extractor, grab the damaged fuse and gently pull it upwards to remove it from its slot. Visually check if the filament inside the fuse is broken or damaged. If it is damaged, replace it with a new fuse of the same amperage. Make sure to insert the new fuse in the correct position and securely seat it in place. Finally, close the fuse box.

Posted on 16 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Hyundai IX35?
How to Reset the "Service" Light on a Hyundai IX35?
Hyundai ix35 (2009-2015 / MK 1) Before you start, sit in the driver's seat of your Hyundai IX35. Begin by activating the instrument panel by pressing the ignition button. Next, repe…
How to Reset the Service Light on a Hyundai Ix35?
How to Reset the Service Light on a Hyundai Ix35?
Hyundai ix35 (2009-2015 / MK 1) To reset the Service light on a Hyundai Ix35, first replace the engine oil. Once this operation is complete, enter the cabin to reset the light. Turn…
How to Replace the Front Headlight Bulb on a Hyundai IX35
How to Replace the Front Headlight Bulb on a Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) In this short video, see the instructions that will allow you to remove and replace the front headlight bulb on the first-generation Hyundai IX35. Fi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos