Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the stabilizer bar bushings

Model: Hyundai I20 IB, MK 2, GB - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Bushings

See other generations:
Video tutorial

In this video we will see how to replace the stabilizer bar bushings, which are soft parts that work hard and eventually wear out; we can see this from the movement that is constantly made by the bar itself and the new bushings. If we hear a metallic noise in the rear or front of our vehicle, and we don't know where it could be coming from, this could be a valid clue.

The bushings are supported by metal brackets held in place by screws; removing them will be very easy, as they are wrapped around a bottleneck. Even if the metal part is rusted, we should not lubricate it, but we should simply replace the bushing, which is designed to be installed dry, and once fixed with its bracket, it will not move anymore.


Posted on 9 June 2025 by ScegliAuto


Related tutorials

How to replace the battery of the Hyundai I20 key
How to replace the battery of the Hyundai I20 key
Hyundai I20 (2020-2026 / MK 3, BC3) In the following mini guide aimed at all of you who own a third edition Hyundai I20, we will explain the various steps you need to follow if you inte…
How to Change the Battery and Key Shell of a Hyundai i20
How to Change the Battery and Key Shell of a Hyundai i20
Hyundai I20 (2014-2021 / IB, MK 2, GB) In this video tutorial, you will learn how to disassemble and replace the battery of the remote key, as well as how to replace the entire shell of th…
How to Replace the External Mirror on a Hyundai I20
Hyundai I20 (2014-2021 / IB, MK 2, GB) This video shows how to replace the external mirror on a Hyundai I20. Using a plastic or rubber-coated lever, pry between the perimeter of the mirror…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos