Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the brake lights of the Hyundai Accent

Model: Hyundai Accent YC, MK 5, HC - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tail light bulb

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble and replace the brake lights of the Hyundai Accent, in simple steps. First, we open the rear hatch of the trunk and begin to remove the side interior lining, accessing the inside of the rear light; then we unscrew the screws fixing the light and disconnect the electrical connector of the bulbs to remove it from the outside, as shown in the video.

At this point, we replace the faulty brake lights with new ones, of the right type and with the same attachment, finally reassembling the rear light!


Posted on 10 July 2025 by ScegliAuto


Related tutorials

How to replace the rear headlight bulb of the Hyundai Accent 4
How to replace the rear headlight bulb of the Hyundai Accent 4
Hyundai Accent (2010-2017 / RB, RC, MK 4) Replacing one of the rear bulbs of your Hyundai Accent Mk4 is really simple and thanks to the procedure described in the following guide, you will be…
How to Change the Rear Light Bulbs on a Hyundai Accent
How to Change the Rear Light Bulbs on a Hyundai Accent
Hyundai Accent (2010-2017 / RB, RC, MK 4) Need to replace the rear light bulbs on a Hyundai Accent? In this video, learn how to remove the light and replace the bulbs inside. Open the boot li…
How to replace the front headlight of the Hyundai Accent
How to replace the front headlight of the Hyundai Accent
Hyundai Accent (2005-2009 / MK 2, MC) Below we will discover the instructions that will allow us to disassemble and replace the front headlight of the Hyundai Accent. First, we open the h…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos