Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Accent
    4. : How to change the rear light bulbs on a Hyundai Accent

Hyundai Accent - Video tutorial

Model: Hyundai Accent MK 4, RB, RC - Years 2010-2017
Part: Rear light bulb
Operation: How to change the rear light bulbs on a Hyundai Accent

Do we need to replace the rear light bulbs of a Hyundai Accent? Let's see in this video how to disassemble the lighthouse and replace the bulbs inside. We open the bonnet of the luggage compartment, remove the cloth cover placed on the side of the same. Remove the rear light cover (remove the lamp holders from the light) and replace the damaged bulbs with new ones (the same size and voltage). Finally we go to reassemble the lighthouse with attached screws and reconnect the lamp holders inside the lighthouse. We test the correct functioning of the previously mounted bulbs.


Posted on 19 November 2023 by ScegliAuto



How to replace the rear light bulbs on Hyundai Accent
Hyundai Accent (2017-2024 / YC, HC, MK 5) In today's video tutorial we will see how to remove and replace the rear light bulbs of the Hyundai Accent. First of all, we open the tailgate of the
How to dismantle the rear light of the Hyundai Accent.
Hyundai Accent (2005-2009 / MK 2, MC) Let's briefly see in this guide the instructions on how to disassemble and replace the rear taillight, thus replacing its bulbs, of the Hyundai Accen
Dashboard lights replacement on Hyundai Accent
Hyundai Accent (2005-2009 / MK 2, MC) How to disassemble the Hyundai Accent ceiling light to replace damaged bulbs or to replace the same? We pry with a screwdriver between the ceiling li

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos