Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Accent
    4. : How do i replace the dashboard bulbs of the Hyundai Getz?

Hyundai Accent - Video tutorial

Model: Hyundai Accent MK 1, LC - Years 1999-2005
Part: Light bulb
Operation: How do i replace the dashboard bulbs of the Hyundai Getz?

In order to replace the bulbs in the Hyundai Getz instrument panel, you must first remove the plastic cover that surrounds it. To do this you will need to loosen the screws located in its upper part and unhook the clips in the lower part. At this point, it will be possible to loosen the screws that were previously covered by the cover and loosen them so that the instrument panel can be extracted from its housing. The bulbs can be removed from its back even without removing the connector. After the bulbs have been replaced, the instrument cluster can be reinstalled.


Posted on 10 March 2024 by ScegliAuto



How to replace the bulbs of the air conditioning controls of the Hyundai Accent
Hyundai Accent (1999-2005 / MK 1, LC) Below we will discover the necessary instructions to disassemble and replace the bulbs of the air conditioning controls of the Hyundai Accent. First
How to change the rear light bulbs on a Hyundai Accent
Hyundai Accent (2010-2017 / MK 4, RB, RC) Do we need to replace the rear light bulbs of a Hyundai Accent? Let's see in this video how to disassemble the lighthouse and replace the bulbs insid
How to replace the rear light bulbs on Hyundai Accent
Hyundai Accent (2017-2024 / YC, HC, MK 5) In today's video tutorial we will see how to remove and replace the rear light bulbs of the Hyundai Accent. First of all, we open the tailgate of the

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos