|
Do it yourself
| |||
| ||||
How to delete the DPF warning on Hyundai Tucson
Model: Hyundai Tucson
TL, MK 3
- Years 2015-2021
In this video, we see how to reset the DPF error light on a Hyundai Tucson (or a Kia Sportage): when the warning light appears, it means that the DPF is almost blocked, and the car needs to complete a cycle of active regeneration, which requires specific conditions to start, and which we can create in this way: drive the vehicle over 60 km/h, ideally on a rural road, maintaining a high gear, and with the engine speed between 1500 and 2000 rpm. We will need to drive in these conditions for at least 15/20 minutes, during which the engine management system will automatically activate the regeneration. The warning light will disappear from the dashboard on its own once the cycle has been successfully completed. It is very important not to ignore the warning, and not to turn off the engine if regeneration is suspected to be in progress.
Posted on 28 August 2025 by ScegliAuto
Video tutorial
Related tutorials
Hyundai Tucson
(2015-2021 /
TL, MK 3)
The reset of the service light of the Hyundai Tucson can be done using only the commands that the car is equipped with, no other external tools, comp…
Hyundai Tucson
(2022-2026 /
NX4, MK 4)
Following these short and simple instructions, we will see how to reset the tire pressure warning on the Hyundai Tucson; before resetting the TPMS se…
Hyundai Tucson
(2022-2026 /
NX4, MK 4)
Shortly we will see the instructions that will allow us to check the tire pressures of the Hyundai Tucson, also performing the reset of the TPMS warn…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.307
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
