|
Do it yourself
| |||
| ||||
Even on the Hyundai Kina electric car, we have to change the oil.
Model: Hyundai Kona
MK 2
- Years 2023-2026
We can see that even the electric Hyundai Kona has a gearbox (a transmission) that requires oil to lubricate the gears, to transfer the power from the engine to the wheels. The oil inside lubricates the gears, cools the system, and protects against metal deposits. The video also shows that an early oil change can be a good idea to preserve the longevity of the gearbox; in fact, there is a tendency for early wear due to the presence of metal particles. The gearbox is recognizable because it has half shafts connected to two plugs: one for draining at the bottom and one for filling at the top; it is also better to unscrew the filling plug to facilitate draining: drain the oil into a basin (dispose of it at an authorized center) and refill with specific oil (in the video, Redline MT-LV is recommended). Only a little is needed, about a liter. Tighten the plugs, changing the gaskets.
Posted on 15 October 2025 by ScegliAuto
Video tutorial
Related tutorials
Hyundai Kona
(2023-2026 /
MK 2)
When changing the oil filter of the 2023 Hyundai Kina, we need to be very careful because the filter system is completely different from that of prev…
Hyundai Kona
(2017-2023 /
MK 1)
Through this video guide, we will be able not only to independently change the engine oil and oil filter, but also to reset the maintenance reminder …
Hyundai Kona
(2017-2023 /
MK 1)
Today we will explain how to replace the motor oil of the Hyundai Kona in less than 10 minutes. To perform the oil replacement, we must purchase the …
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.303
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |