Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in a 2018 Hyundai Kona

Model: Hyundai Kona MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Engine oil

See other generations:
Video tutorial

Today we will explain how to replace the motor oil of the Hyundai Kona in less than 10 minutes. To perform the oil replacement, we must purchase the TRAVELLER motor oil of 4.8 L and the new oil filter.

We start the replacement by opening the front hood and removing the oil tank cap, then we lift the vehicle on stands to facilitate the oil draining into a container. We then remove the drain plug of the oil pan and let the oil drain into the container.

While the oil continues to drain, we remove the oil filter box located next to the oil pan and replace it. We tighten the drain plug and lower the vehicle back to the ground so we can pour the oil into the tank.


Posted on 30 April 2025 by ScegliAuto


Related tutorials

How to Reset the Oil Warning Light on a 2023 Hyundai Kona
How to Reset the Oil Warning Light on a 2023 Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) To reset the oil warning light on a 2023 Hyundai Kona, first replace the oil and then top up the fluid only after replacing the oil filter. The steps…
How to Replace Oil and Filter on Hyundai Kona
How to Replace Oil and Filter on Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) How to replace oil and filter on a Hyundai Kona? Open the car door and pull up the engine compartment release lever located at the bottom left of the…
How to reset the service light on a 2017 Hyundai Kona
How to reset the service light on a 2017 Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Resetting the service light related to the service interval on a 2017 Hyundai Kona involves very simple steps that you can perform independently. The…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos