Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the oil filter of the 2023 Hyundai Kona.

Model: Hyundai Kona MK 2 - Years: 2023, 2024, 2025, 2026
Part: Oil filter

See other generations:
Video tutorial

When changing the oil filter of the 2023 Hyundai Kina, we need to be very careful because the filter system is completely different from that of previous versions. To unscrew the filter housing, it is necessary to use a 24 mm wrench, then remove the entire housing.

We remove the O-ring from the groove, take out the locking pin, and pull out the internal filter cartridge (it will come out under pressure). We clean the metal housing thoroughly.

Now we can insert the new cartridge into the housing, then insert the new pin to lock it in place and reassemble a new O-ring in the groove, making sure to lightly lubricate it with clean oil first. We hand-tighten the housing.


Posted on 1 January 2026 by ScegliAuto


Related tutorials

How to Replace Oil and Filter on Hyundai Kona
How to Replace Oil and Filter on Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) How to replace oil and filter on a Hyundai Kona? Open the car door and pull up the engine compartment release lever located at the bottom left of the…
How to Reset the Service Light on the Hyundai Kona 2023
How to Reset the Service Light on the Hyundai Kona 2023
Hyundai Kona (2017-2023 / MK 1) To complete the manual reset of the service light on your Hyundai Kona (2023 model), you need to follow the procedure described below. First, get in …
How to Reset the "Service" Light on a Hyundai Kona?
How to Reset the "Service" Light on a Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) Hello, this guide aims to reset the "Service" light on your Hyundai Kona. Start the vehicle's instrument panel by pressing the ignition button. Using…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos