Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace Oil and Filter on Hyundai Kona

Model: Hyundai Kona MK 1 - Years 2017-2023
Part: Engine oil

How to replace oil and filter on a Hyundai Kona? Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet; remove the cap above the engine head (to allow the fluid to drain more quickly). Lift the car on a jack (two-post lift) and using a strap wrench, unscrew the large oil filter (remove the worn oil filter) and fit a new one. Unscrew the bolt of the oil sump; drain the fluid into a container. Finally, top up with new fluid (check the level with the dipstick) and close the front bonnet.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Hyundai Kona (2017-2023 / MK 1) To remove the cabin air filter from the Hyundai Kona, first remove the glove compartment located in the dashboard. Open the glove compartment and unc…
Hyundai Kona (2017-2023 / MK 1) Replacing the air filter of the Hyundai Kona is an operation that follows simple and quick steps. The first step is to open the passenger side door. …
Hyundai Kona (2017-2023 / MK 1) To replace the air filter on a Hyundai Kona, open the bonnet to access the components within the engine bay. The air filter box is located at the bot…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos