Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of the Hyundai Tucson.

Model: Hyundai Tucson NX4, MK 4 - Years: 2022, 2023, 2024, 2025, 2026
Part: Front bumper

See other generations:
Video tutorial

In this short and simple guide, we will see the instructions that will allow us to disassemble and replace the front bumper of the Hyundai Tucson. First, let's open the vehicle's hood and start unscrewing all the fastening screws we find on the upper and lower parts of the bumper; we will also unscrew the additional screws located on both sides of the front wheel arches, removing the plastic trim as shown in the video.

At this point, gently detach the bumper from the sides until it is completely removed, replacing it with the new one if necessary; then we will reassemble and securely fasten the bumper.


Posted on 10 December 2025 by ScegliAuto


Related tutorials

Removing the Front Bumper of the Hyundai Tucson
Removing the Front Bumper of the Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) Today, you will learn how to remove and replace the front bumper of the Hyundai Tucson. First, open the bonnet of the vehicle and start removing all …
How to Remove the Rear Bumper on the Hyundai Tucson?
How to Remove the Rear Bumper on the Hyundai Tucson?
Hyundai Tucson (2004-2009 / JM, MK 1) In this tutorial, you will see how to remove the rear bumper on the first generation Hyundai Tucson, a very quick operation. First, remove both tail …
Guide to Removing the Front Headlamp of the Hyundai Tucson
Guide to Removing the Front Headlamp of the Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) Discover in this guide the instructions to remove the front headlamp of the Hyundai Tucson. First, open the bonnet and start by removing the front bu…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos