Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper on the Hyundai Tucson?

Model: Hyundai Tucson JM, MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009
Part: Rear bumper

See other generations:
Video tutorial

In this tutorial, you will see how to remove the rear bumper on the first generation Hyundai Tucson, a very quick operation. First, remove both tail lights by simply unscrewing the 6 bolts located on the inner edge of each.

Next, unscrew the screws located inside the wheel arches, 5 on each side, unscrew the screws on the upper edge of the bumper, and finally the screws on the lower edge. At this point, grasp the bumper, pull it outwards, and unclip it from the frame.

To fit a replacement, simply follow the reverse procedure.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

How to Dismantle the Rear Bumper on the Hyundai Tucson?
How to Dismantle the Rear Bumper on the Hyundai Tucson?
Hyundai Tucson (2015-2021 / MK 3, TL) In this tutorial, you will see how to dismantle the rear bumper on the Hyundai Tucson, a very simple and quick operation. First, open the boot, then …
How to remove the front bumper of the Hyundai Tucson.
How to remove the front bumper of the Hyundai Tucson.
Hyundai Tucson (2022-2026 / NX4, MK 4) In this short and simple guide, we will see the instructions that will allow us to disassemble and replace the front bumper of the Hyundai Tucson. Fi…
Removing the Front Bumper of the Hyundai Tucson
Removing the Front Bumper of the Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) Today, you will learn how to remove and replace the front bumper of the Hyundai Tucson. First, open the bonnet of the vehicle and start removing all …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos