Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to tighten the bolts on a 2010 Hyundai Tucson

Model: Hyundai Tucson LM, MK 2 - Years 2010-2015
Part: Wheel

In this video we can see how to tighten the bolts of a 2010 Hyundai Tucson; first of all, we will need to park in a safe and flat place, and pull the handbrake. Then we will need to gather the necessary tools, such as the jack and the key to unlock the nuts. Now we loosen the nuts slightly by turning them counterclockwise, this before lifting the car with the jack. Now we can lift the car and remove the wheel nuts by hand. Then we can replace the wheel. Lower the vehicle and tighten the wheel nuts, following a star pattern, and using the key, for a uniform fastening.

Posted on 23 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light on a Hyundai Tucson?
How to Remove the Rear Light on a Hyundai Tucson?
Hyundai Tucson (2015-2021 / TL, MK 3) To replace the rear light on a Hyundai Tucson, open the boot and loosen the bolts located between the seal and the light itself. By removing the bolt…
How to Replace the Front Brake Pads on a Hyundai Tucson
How to Replace the Front Brake Pads on a Hyundai Tucson
Hyundai Tucson (2004-2009 / JM, MK 1) Follow these steps to replace the front brake pads on a Hyundai Tucson. Lift the vehicle on a column jack (crick) to the desired height, then remove …
How to remove the rear seats in the Hyundai Tucson?
How to remove the rear seats in the Hyundai Tucson?
Hyundai Tucson (2022-2026 / NX4, MK 4) In this tutorial, we can see how to remove the rear seats in the Hyundai Tucson, a very simple and quick operation. First, we open both the rear door…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos