Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Hyundai Tucson?

Model: Hyundai Tucson MK 3, TL - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Brake pads

See other generations:
Video tutorial

To replace the front brake pads on a Hyundai Tucson, lift the car to loosen the bolts securing the corresponding wheel. Remove the wheel to access the components at the back: the pads can be slid out after loosening the bolts that secure the brake caliper.

Once the old pads are removed, insert the new ones, securing the caliper properly. Finally, reinstall the corresponding wheel and tighten the bolts.


Updated on 17 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Hyundai Tucson
How to Replace the Front Brake Pads on a Hyundai Tucson
Hyundai Tucson (2004-2009 / JM, MK 1) Follow these steps to replace the front brake pads on a Hyundai Tucson. Lift the vehicle on a column jack (crick) to the desired height, then remove …
How to Replace the Rear Brake Pads of the Hyundai Tucson
How to Replace the Rear Brake Pads of the Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) In this brief and simple guide, you will learn how to remove and replace the rear brake pads and handbrake pads of the Hyundai Tucson. First, raise t…
How to replace the brake pads on a 2006 Hyundai Tucson
How to replace the brake pads on a 2006 Hyundai Tucson
Hyundai Tucson (2004-2009 / JM, MK 1) Here’s how to replace the brake pads on a 2006 Hyundai Tucson: loosen the wheel nuts with the vehicle on the ground, then lift it with a jack and pla…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos